Experiments with bottle tower

Lattice
           29 June 2017

23 January 2018

February 2018


Cucumber, Balsom and Herb "Punarnava"
                                                        29 June 2017

Capsicum
                   29 June 2017

Cherry tomato
                 24 July 2017


22 August 2017

Beans
           22 August 2017
Green vegetable (Rai)
          22 August2017
Herb "Punarnava"
                22 August 2017

Comments

Post a Comment

Popular posts from this blog

Bottle tower assembly

Image
You can use 5-7 bottles in one tower depending on the size of the bottle. Drill a hole in the bottom of the bottles using 44mm or higher hole saw. In the last bottle drill a hole using 19 mm hole saw. Slide the 20 mm pipe through the bottles with the smaller hole at the top. Make a small hole through the neck and pipe of the lower bottle using the pointed tip soldering iron.  Insert the steel pin or nail to lock the bottles in position. You can bend the pin so that it does not slide out. Using the pointed tip soldering iron cut slots on both sides of the bottle for planting. Paint the bottles as per your choice. Your bottle tower is ready for use. You can water from the top and water will tricle down from the lower end.
Read more